Xilinx V4L2 driver
The purpose of this page is to describe the Xilinx Linux V4L2 pipeline driver.
Table of Contents
Overview
The Xilinx Linux V4L2 pipeline driver(xilinx-vipp.c) represents the whole pipeline with multiple sub-devices. In the V4L2 framework it is a bridge driver. The pipeline can be configured through the media node(/dev/media*), and the control operations such as stream on/off can be performed through the video node(/dev/video*). Both device nodes are created be the pipeline driver. The pipeline driver also includes the wrapper layer of the dmaengine API, in current implementation to the VDMA driver/IP, and this enabled to read/write frames from RAM.
The general description of V4L2 framework is documented here, v4l2-framework.txt.
Linux Kernel defconfig
CONFIG_VIDEO_XILINX should be enabled. The CONFIG_VIDEO_XILINX depends on CONFIG_VIDEO_V4L2, CONFIG_VIDEO_V4L2_SUBDEV_API, and CONFIG_OF.
Device tree binding
The dts node should be defined with correct configuration. The common dts properties are described in video.txt
axi_video_cap { compatible = "xlnx,axi-video"; dmas = <&axi_vdma_1 1>, <&axi_vdma_3 1>; dma-names = "port0", "port1"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; direction = "input"; vcap0_in0: endpoint { remote-endpoint = <&scaler0_out>; }; }; port@1 { reg = <1>; direction = "input"; vcap0_in1: endpoint { remote-endpoint = <&switch_out1>; }; }; }; };
Example Designs
V4L2 Driver Sub-Pages
- Xilinx V4L2 DisplayPort 1.4 RX Subsystem Driver
- V4L-Utils & Libdrm Build Instructions
- Xilinx V4L2 CFA driver
- Xilinx V4L2 CRESAMPLE driver
- Xilinx V4L2 Demosaic driver
- Xilinx V4L2 Gamma Correction LUT driver
- Xilinx V4L2 MIPI CSI driver
- Xilinx V4L2 REMAPPER driver
- Xilinx V4L2 RGB2YUV driver
- Xilinx V4L2 Scaler driver
- Xilinx V4L2 SDI Rx driver
- Xilinx V4L2 Switch driver
- Xilinx V4L2 TPG driver
- Xilinx V4L2 VPSS CSC driver
- Xilinx V4L2 VPSS Scaler driver
- Xilinx V4L2 hdmirx driver
Related Links
© Copyright 2019 - 2022 Xilinx Inc. Privacy Policy