Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  • Make sure HDMI-Rx supports HDR10 and should be configured to 4kp60 mode

  • Make sure HDMI-Tx (Monitor) is 4K HDR10 compatible

  • It is mandatory to use HDR10 streams for all below pipelines.

  • File location should be USB-3.0/SATA/RAMFS to avoid the read-write bandwidth issue - while running record/playback pipelines

  • is host/client IP address and 5004 is port number in streaming pipeline

  • Video0 in the each gst-launch pipelines indicates a video node for the input source

  • For NV16 XV15 use-cases, please change the value of the plane-id property in the pipeline. Refer to above table for the required plane-id value.

  • Display RAW use case: Run the following gst-launch-1.0 command to display the XV20 HDR10 video using the GStreamer pipeline.