...
For the overview, software tools, system requirements, and design files follow the link below:
The below figure shows the HDMI, MIPI Video Capture along with HDMI, I2S Audio Capture and HDMI Display with Audio Capture and Display design hardware block diagram.
...
Refer to the below link to download all TRD contents. [TO DO: To be updated by 19th Oct 2022]
Refer to Section 4.1 : Download the TRD of the
Zynq UltraScale+ MPSoC VCU TRD 2022.2
wiki page to download all TRD contents.
...
Block Noise is observed in AVC_MEDIUM and AVC_LOW in 4Kp60 pipelines
The Digilent PMOD card cannot support passive sources such as microphones. Only active sources are to be connected. Here the source is from the Aux cable which is connected in between the source (laptop) and PMOD card.
For PetaLinux related known issues please refer to: PetaLinux 2022.2 - Product Update Release Notes and Known Issues [TO DO: To be updated by 19th Oct 2022]
For VCU related known issues please refer to AR# 76600: LogiCORE H.264/H.265 Video Codec Unit (VCU) - Release Notes and Known Issues and Xilinx Zynq UltraScale+ MPSoC Video Codec Unit.
...
For playback in DP, video input resolution should match the DP's native resolution. This constraint is in support of the GUI. In the GUI, if we allow a video source other than native resolution (by setting full screen overlay) then the graphics layer will disappear. To recover, the GUI user need to kill and relaunch the GUI app. To avoid this condition the TRD only supports video input resolution which is equal to the DP's native resolution.
For PetaLinux related limitations please refer to: PetaLinux 2022.2 - Product Update Release Notes and Known Issues [TO DO: To be updated by 19th Oct 2022]
For VCU related limitations please refer to AR# 76600: LogiCORE H.264/H.265 Video Codec Unit (VCU) - Release Notes and Known Issues, Xilinx Zynq UltraScale+ MPSoC Video Codec Unit and PG252 [TO DO: To be updated by 19th Oct 2022].
2.3 Optimum VCU Encoder parameters for use-cases:
...