This page provides all the information related to Design Module 4 - VCU TRD 10G HDMI Video Capture and Display design.
...
| Table of Contents | ||
|---|---|---|
|
1 Overview
The primary goal of this Design is to demonstrate the capabilities of VCU hard block present in Zynq UltraScale+ EV devices. The TRD will serve as a platform to tune the performance parameters of VCU and arrive at optimal configurations for encoder and decoder blocks with the streaming use case where bandwidth plays a vital role. 10G will give sufficient bandwidth for the streaming protocol to play video pipeline smoothly.
This design supports the following video interfaces:
...
The below sections describe the 10G HDMI Video Capture and HDMI Display design. It is VCU TRD design supporting 10G HDMI-Rx and HDMI-Tx. For the overview, software tools, system requirements and design files follow the link below:
The below figure shows the 10G HDMI Video Capture and HDMI Display design hardware block diagram.
...
Refer below link for Board Setup
Board Connections:
...
Refer below link to download all TRD contents.
Refer Section 4.1 : Download the TRD of
Zynq UltraScale+ MPSoC VCU TRD 2020.1wiki page to download all TRD contents.
...
Refer below link for detailed run flow steps
1.3 Build Flow
Refer below link for Build Flow
...
2 Other Information
2.1 Known Issues
...