...
Refer below link for Board Setup
1.2 Run Flow
The TRD package is released with the source code, Vivado project, Petalinux BSP, host software required for PCIe and SD card image that enables the user to run the demonstration. It also includes the binaries necessary to configure and boot the ZCU106 board. Prior to running the steps mentioned in this wiki page, download the TRD package and extract its contents to a directory referred to as ‘TRD_HOME' which is the home directory.
Refer below link to download all TRD contents.
Refer Section 4.1 : Download the TRD of
Zynq UltraScale+ MPSoC VCU TRD 2020.2wiki page to download all TRD contents.
...
Refer below link for Build Flow
Zynq UltraScale+ MPSoC VCU TRD 2020.2 - Build Flow
...
2 Other Information
2.1 Known Issues
For Petalinux related known issues please refer: PetaLinux 2020.1 2 - Product Update Release Notes and Known Issues [ToDo: Link needs to update for 2020.2]
For VCU related known issues please refer AR# 66763: LogiCORE H.264/H.265 Video Codec Unit (VCU) - Release Notes and Known Issues and Xilinx Zynq UltraScale+ MPSoC Video Codec Unit. [ToDo: Link needs to update for 2020. 2]For Out of memory issue please refer [ToDo: Link needs to update for 2020.
2
...
2.2 Limitations
For Petalinux related limitations please refer PetaLinux 2020.1 2 - Product Update Release Notes and Known Issues [ToDo: Link needs to update for 2020.2]
For VCU related limitations please refer AR# 66763: LogiCORE H.264/H.265 Video Codec Unit (VCU) - Release Notes and Known Issues, Xilinx Zynq UltraScale+ MPSoC Video Codec Unit and PG252 link.[ToDo: Link needs to update for 2020.2]
2.3 Optimum VCU Encoder parameters for use-cases:
...
Enable
profile=highand useqp-mode=autofor low-bitrate encoding use-cases.The high profile enables 8x8 transform which results in better video quality at low bitratesbit rates.