AXI DMA Standalone application

The Versal example design will show how to run AXI DMA standalone application example on VCK190 and intended to demonstrate the AXI DMA standalone driver which is available as part of the Xilinx Vivado and Vitis.

VCK190

https://github.com/Xilinx/XilinxCEDStore/tree/

2023.2/ced/Xilinx/IPI/VCK190-AXIDMA-Example

2023.2

CIPS and DDR

Configurable example design showing CIPS IP and DDR connections, delivered via the CED Store for use within Vivado

VCK190/VMK180

https://github.com/Xilinx/XilinxCEDStore/tree/

2022.1/ced/Xilinx/IPI/cips_ddr_pl_debug

2022.

1

CIPS VIP

Configurable example design showing simulating with the CIPS Verification IP, delivered via the CED Store for use within Vivado

VCK190

https://github.com/Xilinx/XilinxCEDStore/tree/

2022.1/ced/Xilinx/IPI/cips_vip

2022.

1

AXI BRAM

This Blog entry is intended to illustrate how to access the AXI BRAM from the Versal™ Application processing Unit (APU) through the NoC

VCK190

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Basic-read-write-to-AXI-BRAM-from-PS-APU-through-NoC-in-Versal/ba-p/1172775

2020.2

CIPS & MicroBlaze

This blog post shows how to leverage Versal CIPS IP from MicroBlaze

VCK190

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/How-to-leverage-Versal-CIPS-IP-from-MicroBlaze/ba-p/1184023

2020.2

Memory Interfaces

This blog entry will cover important information you should understand before designing with Memory Interfaces

on Versal Adaptive SoC devices. 

VCK190, VMK180, VPK120, VPK180

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Getting-Started-with-Versal-Memory-Interfaces/ba-p/1192335

2020.2

NoC and DDRMC

This example connects many different DDR devices simultaneously in one design to communicate to PS through NoC. It connects one DDR4 device and two interleaved LPDDR4 devices, which requires one NoC instance to configure the DDRMC for the DDR4 device and another NoC instance to configure the two interleaved DDRMCs for the two LPDDR4 devices.

VCK190/VMK180

https://github.com/Xilinx/Vivado-Design-Tutorials/tree/master/Device_Architecture_Tutorials/Versal/NoC_DDRMC/03-Multiple_DDRMC

2021.

1

NoC and DDRMC

This tutorial introduces the basic concepts, tools, and techniques of the NoC and DDR memory controller design flow in Vivado

VCK190, VMK180, VPK120, VPK180

https://github.com/Xilinx/Vivado-Design-Tutorials/blob/master/Device_Architecture_Tutorials/Versal/NoC_DDRMC/Intro_Design_Flow

2021.

1

NoC and DDRMC

Learn how to tune your NoC and DDR memory controller designs to deliver optimum performance for your designs.

VCK190, VMK180, VPK120, VPK180

https://github.com/Xilinx/Vivado-Design-Tutorials/blob/master/Device_Architecture_Tutorials/Versal/NoC_DDRMC/Performance_Tuning

2021.

1

NoC

This tutorial uses a complex design example to demonstrate how the NoC simplifies the design process for on-chip data movement.

VCK190, VMK180, VPK120, VPK180

https://github.com/Xilinx/Vivado-Design-Tutorials/blob/master/Device_Architecture_Tutorials/Versal/NoC_DDRMC/04-NoC_Data_Movement_Comparison

2021.

1

PCB Design DDRMC

This tutorial introduces best pracices for working with DDR memory pinouts in Versal.

VCK190, VMK180, VPK120, VPK180

https://github.com/Xilinx/Vivado-Design-Tutorials/blob/master/Device_Architecture_Tutorials/Versal/PCB_Design/Memory_Pinouts

2020.2

PCB Design DDR

This tutorial covers how to perform DDRx signal integrity simulations with the Mentor Graphics DDRx Wizard.

VCK190, VMK180, VPK120, VPK180

https://github.com/Xilinx/Vivado-Design-Tutorials/blob/master/Device_Architecture_Tutorials/Versal/PCB_Design/Hyperlynx_DDRx_Timing_Models

2020.2

DDR Calibration Done

This blog post shows how to export the DDR Calibration done pin to the PL in Versal.

VCK190, VMK180, VPK120, VPK180

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Versal-How-to-export-the-DDR-Calibration-done-pin-to-the-PL/ba-p/1230598

2020.2

Performance AXI Traffic Generator

Introduction to the simulation-only and synthesizable versions of the Versal Performance Traffic Generator.

VCK190

https://github.com/Xilinx/Vivado-Design-Tutorials/tree/2022.1/Device_Architecture_Tutorials/Versal/NoC_DDRMC/Versal_Performance_AXI_Traffic_Generator

2022.1

Versal Cache Coherency

Demonstrates how to perform cache coherent transactions from different masters connected to the CCI-500 or cache coherent interconnect on a Versal device.

VCK190

Versal Cache Coherency

2022.2

USB

Examples demonstrating Host & Device mode of the Versal PS USB controller.

VCK190

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/2069987899/Versal+Linux+USB+Device+Driver+Examples

2021.1

Low Speed Peripherals

This repository contains VCK190 design files for PS and PL based LowSpeed IPs.

There are few available designs:

• axi_can - AXI CAN IP design subsytem with CIPS

• axi_can_fd - AXI CAN FD design subsystem with CIPS

• axi_i2c - AXI IIC IP design subsytem with CIPS

• ps_i2c - PS IIC design only

• ps_can_fd - PS CAN FD design only

• axi_uartlite - AXI UARTLite IP design subsytem with CIPS

• ps_sbsa_uart - PS UART IP design only

VCK190

https://github.com/Xilinx/Embedded-Design-Tutorials/tree/

2021.1/examples/versal/lowspeed_IPs

2021.

1

Advanced IO Wizard

This Blog entry is intended for new users of the Versal™ Advanced IO Wizard. It gives an introduction to setting up the Wizard and some insights into running a simulation. 

VCK190, VMK180, VPK120, VPK180, VHK158

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Versal-Advanced-IO-Wizard-Walk-through-on-using-the-Wizard-and/ba-p/1171904

2020.2

Multi-Rate GTY

This example describes a Versal GTY multi-rate design using the following configuration:

• Two rates: 10G and 25G switchable line rates

• Single GTY lane connected through SFP on VCK190/VMK180 evaluation board

VCK190

, VMK180

https://github.com/Xilinx/XilinxCEDStore/tree/

2023.

1/ced/Xilinx/IPI/Versal%20Multi-Rate%20GTY

2023.

1

Simplex TX/RX

This blog post shows how to combine Simplex TX/RX cores for several quads in IP Integrator

VCK190, VMK180, VPK120, VPK180

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Versal-GTY-how-to-combine-Simplex-TX-RX-cores-for-several-quads/ba-p/1178478

2020.2

GTY Simulation

This blog entry covers a GTY simulation example, demonstrating how the GTY comes out of reset, and performs rate change.

VCK190, VMK180, VPK120, VPK180, VHK158

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Versal-GTY-Simulation-Initialization-Reset-and-Rate-Change/ba-p/1176867

2020.2

Combine Within GT Quad

This example introduces the design flow on combining different IP within one quad with the Xilinx Vivado Integrated Design Environment.

VCK190

https://github.com/Xilinx/XilinxCEDStore/tree/2020.2/ced/Xilinx/IPI/Versal%20Combine_within_GT_quad

2020.2

GTY and GTY/GTYP

This blog post discusses the differences between designing with UltraScale+ GTY and Versal GTY/GTYP

N/A

https://

support.xilinx.com/

s/article/Differences-Designing-with-UltraScale

?language=en_US

N/A

IPI Demo: GT to IP Integration

Blog 2A covers simple to complex use cases of Serial Transceivers (GT) in an IPI design, including how to instantiate the GT, making connections to the GT quad, sharing the quad with multiple IPs, assigning GT lane locations, and clocking and reset topology. 

Blog 2B covers how to modify an IP and its GT sources/attributes in the IP examples when needed. It uses Ethernet IP, such as MRMAC and DCMAC as an example. The methods described are also applicable to other parent IPs.

N/A

IPI Blog Series 2A: GT Design Entry in IP Integrator (IPI)
IPI Blog Series 2B: GT to IP (Ethernet) Integration - How to edit IP and its GT sources/attributes

N/A

PCIe Link Debug Demo

This Blog entry is shows how to debug the Versal Adaptive SoC Integrated Block for PCIe Express link issues using in-built "PCIe Link Debug" feature.

VCK190

https://forums.xilinx.com/t5/Design-and-Debug-Techniques-Blog/Debugging-Versal-Adaptive SoC-Integrated-Block-for-PCIe-Express-link/ba-p/1203707

2020.2

Versal Adaptive SoC CPM4 PCIE GEN4x8 QDMA CED Example Design

This blog illustrates steps to generate the CPM4 PCIE Gen4x8 Example Design in Vivado 2021.1 and run some functional tests with the driver provided for the QDMA.

VCK190

https://support.xilinx.com/s/article/000033892?language=en_US

2021.1

PS-GEM

This blog demonstrates how to bring up the PS-GEM in Versal.

VCK190

https://github.com/Xilinx-Wiki-Projects/VCK190-Ethernet/tree/master/2021.1/ps_mio_eth_1g_prod

2021.1

PS and PL based Ethernet

Example designs of using PS GEM and PL BASE-X or SGMII IP on PL with 1G SFP.

VCK190

https://github.com/Xilinx-Wiki-Projects/VCK190-Ethernet/tree/master/2022.1/ps_emio_basex_1g

2021.1

PL 1G Ethernet

This project is about building Versal based AXI 1G/2.5G Ethernet Subsystem example design and testing it by targeting on VCK190 Adaptive SoC device using SGMII SFP

VCK190

https://

github.

com/

Xilinx-

Wiki-

Projects/VCK190-Ethernet/tree/master/2020.2/pl_eth_1G

2020.2

MRMAC

This blog covers the key differences between designing with UltraScale+ CMAC and Versal MRMAC.

VCK190, VMK180, VPK120, VPK180, VHK158

https://

support.xilinx.com/s/article/1209580

2020.2

MRMAC

MRMAC Ethernet TRD with 1588 PTP PPS Phase Synchronization feature and Inline Timestamping logic

 VCK190

https://github.com/Xilinx/vck190-

ethernet-trd

 2022.2

DCMAC

 DCMAC even or odd active lane selection when GTM line rate is 106.25 Gb/s.

N/A

https://support.xilinx.com/s/article/Using-even-or-odd-active-lanes-when-DCMAC-line-rate-is-106-25-Gb-s?language=en_US

2023.1

DCMAC

Versal DCMAC example design running on NoC DDRMC LPDDR4

N/A

 https://support.xilinx.com/s/article/Versal-DCMAC-example-design-running-on-NOC-DDRMC-LPDDR4?language=en_US

2023.1

AI Engine tools, graphs, kernels and compiler

Series of blog posts that demonstrates how to get started with AI Engine tools, graphs, kernels and compiler.

VCK190

https://

support.xilinx.com/s/

question/0D52E00006xR6iXSAS/ai-engine-blog-series

2020.2

OpenAMP/FreeRTOS

This example demonstrates the usage of remoteproc kernel driver by the master processor (A72) on the VCK190 to load remote application firmware on the R5 processor.

VCK190

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/953647231/Loading+FreeRTOS+RPU+firmware+on+VCK190+using+remoteproc+driver

2021.

1

Embedded Tutorial

The examples in this tutorial are created using the Xilinx tools running on a Windows 10, 64-bit operating system, Vitis software platform and PetaLinux on a Linux 64-bit operating system. Other versions of the tools running on other Windows installs might provide varied results. These examples focus on introducing you to the following aspects of embedded design.

VCK190

https://xilinx.github.io/Embedded-Design-Tutorials

/docs/2020.2/build/html/index.html

YouTube Videos:

1. https://www.youtube.com/watch?v=D-iUx3wxD5s&t=6s

2. https://www.youtube.com/watch?v=7iX44nWb9zA&t=2s

3. https://www.youtube.com/watch?v=GGJlAkVc9aw&t=3s

4. https://www.youtube.com/watch?v=drtAHHAcEyA&t=6s

5. https://www.youtube.com/watch?v=gdgfeOPTdfA