Table of Contents |
---|
Introduction
This page provides details related to the standalone emacps driver.
This driver supports GEM on Zynq, Zynq Ultrascale+ MPSoC and Versal
How to enable
emacps driver can be found at. For more information, please refer to GEM Ethernet chapter in Zynq TRM (UG585), ZynqMP TRM (UG1085) or Versal TRM (AM011).
Driver Sources
The source code for the driver is included with the Vitis Unified Software Platform installation, as well as being available in the Xilinx Github repository.
Driver Name | Path in Vitis | Path in Github |
---|---|---|
emapcs | <Vitis Install Directory>/data/embedded/XilinxProcessorIPLib/drivers/emacps | https://github.com/Xilinx/embeddedsw/tree/master/XilinxProcessorIPLib/drivers/emacps |
Note: To view the sources for a particular release, use the rel-version tag in github. For example, for the 2020.1 release, the proper version of the code is: https://github.com/Xilinx/embeddedsw/tree/xilinx_v2021.1/XilinxProcessorIPLib/drivers/emacps |
The driver
emacps
|
- doc -
source code is organized into different folders. The table below shows the emacps driver source organization.
Directory | Description |
---|---|
doc | Provides the API and data structure details |
|
- examples - Reference application to
data | Driver .tcl, .mdd file and .yaml files |
examples | Example applications that show how to use the driver |
|
- src - Driver source files
Features supported
features | |
src | Driver source files, make and cmake files |
Note: AMD Xilinx embeddedsw build flow is changed from 2023.2 release to adapt to the new system device tree based flow. For further information, refer to the wiki page Porting embeddedsw components to system device tree (SDT) based flow - Xilinx Wiki - Confluence (atlassian.net).
The .yaml(in data folder) and CMakeLists.txt(in src folder) files are needed for the System Device Tree based flow. The Driver .tcl and .mdd files are for the older build flow which will be deprecated in the future.
Driver Implementation
For a full list of features supported by this IP, please refer to GEM Chapter in Zynq TRM (UG585), ZynqMP TRM (UG1085) or Versal TRM (AM011) for respective devices.
Features
Controller/Driver features supported
10/100/1000 speeds, phy/external loop back (supported in emacps
PHY management
DMA, Packet buffer support, Checksum offload, FCS stripping, programmable IPG, multicasting, promiscuous and broadcast modes.
Flow control and half duplex features are supported by controller but not demonstrated in the examples.
ZynqMP and Versal only: 64 bit descriptor support, Priority queue support, Jumbo frame support, CCI support
PHY configurations
emacps driver supports the following PHY configurations:
Family | PHY | Support |
---|---|---|
Zynq | RGMII | Yes - supported in HW and driver |
ZynqMP | RGMII | Yes - supported in HW and driver |
ZynqMP | SGMII | Yes - supported in HW and driver |
Versal | RGMII | Yes - supported in HW and driver |
...
Known Issues and Limitations
The following features are not supported:
External FIFO interface - this driver only targets DMA
Partial store and forward not supported
Interop
PHY device Marvell 88E1116 has been tested on Zynq evaluation board
PHY devices Marvell 88E1512, TI DP83867 (RGMII and SGMII), VSC8211 and RTL8211 have been tested on ZynqMP.
PHY devices Marvell 88E1512, TI DP83867,
...
VSC8531_02 and
...
RTL8211DN have been tested on Versal.
Performance
Standalone ethernet performance is benchmarked with the use of light weight IP library and application. Please refer to
http://www.wiki.xilinx.com/Standalone+LWIP+library#Performance
Test cases
Emacps example
...
Example Applications
Emacps driver supports a DMA based loopback example and it describes how its different features can be exercised. These example applications can be imported into the Vitis IDE from the Board Support Package settings tab.
Links to Examples
Examples Path:
https://github.com/Xilinx/embeddedsw/tree/master/XilinxProcessorIPLib/drivers/emacps
Test Name | Example Source | Description |
---|---|---|
Emacps DMA loopback example |
...
...
Emacps basic DMA loopback examples sends and receives a single frame in loopback mode. |
...
readme.txt for more information. |
...
Note: emacps 1588 examples were deprecated as they were originally added as a reference for Zynq-7000 but the timestamping logic in that version of the IP has issues, rendering this feature unusable. These examples were removed in 2021.1 release.
Example Application Usage
Emacps DMA loopback example
Emacps basic DMA loopback examples sends and receives a single frame in loopback mode.
Expected Output
|
Known Issues/Limitations
None
Change log
2020.2
Summary:
- Removed deprecated Zynq IEEE1588 example.
- Updated parallel makefile execution
Example Design Architecture
NA
Performance
Standalone ethernet performance is benchmarked with the use of light weight IP library and application. Please refer to
http://www.wiki.xilinx.com/Standalone+LWIP+library#Performance
Change Log
2023.2
...
...
...
...
...
2023.1
...
Summary:
- Baremetal clocking support.
...
...
...
...
...
...
2022.2
Summary:
- Minor enhancements. Bug fix in clearing status register.
...
...
...
...
...
bc126d5 emapcs: Clear status registers properly in reset
761c9af Fixed trivial typos reported by codespell utility
e5bfe9c emacps: Remove peripheral test app support
4ac1709 emacps: Move common variable definition to _util example file
2019.1
Summary:
- Minor enhancements
- Bugfixes
...
...
...
...
...
...
6a7d6b2 emacps: Add provision to set RX watermark register
d4f92e6 emacps: Use selected speed in loopback mode
625c97b emacps: Fix BD space handling in examples
de0a89f emacps: Fix pointer cast warnings in examples
53a68ac emacps: Add support for psv_ethernet IP name
f626344 emacps: Fix data alignment for IAR compiler in example
7477196 emacps: Update example to use PSV_ suffix
2018.3
Summary:
- Cleanup and fixes for GCC and coverity warnings
- Support for 64 bit addressing on Microblaze
Commits:
07c73dd emacps: Fix GCC warnings and add an additional canonical property
40d00e8 emacps: Fix coverity warnings
6ea92b1 emacps: Fix unused variable warning in example
05be3ac emacps: Remove duplicate definition of XEmacPs_BdSetLength
5b51039 emacps: Fix PTP interrupt masks and cleanup stale comments
848ceb0 emacps: Fix warning for redefining interrupt number
b87f96d drivers: Support 64 bit DMA addresses for Microblaze-X
2018.2
No changes
2018.1
...
2017.4
...
2017.3
...
2017.2
...
2017.1
...
2016.4
No changes
2016.3
...
Related Links
Baremetal Drivers and Libraries
...
2019.2
https://github.com/Xilinx/embeddedsw/blob/release-2019.2/doc/ChangeLog#L36
2019.1
https://github.com/Xilinx/embeddedsw/blob/release-2019.1/doc/ChangeLog#L75
2018.3
https://github.com/Xilinx/embeddedsw/blob/release-2018.3/doc/ChangeLog#L126
2018.2
None
2018.1
https://github.com/Xilinx/embeddedsw/blob/release-2018.1/doc/ChangeLog#L131
2017.4
https://github.com/Xilinx/embeddedsw/blob/release-2017.4/doc/ChangeLog#L21
2017.3
https://github.com/Xilinx/embeddedsw/blob/release-2017.3/doc/ChangeLog#L368