...
This design is based on the ZCU106 VCU RDMI HDMI ROI TRD which can be found at the following link
The two designs are functionally equivalent, please refer to the page linked above for details related to the system architecture, gstreamer plugin info, DPU configuration and usage, etc. The sections below provide direct links to the relevant information.
...
To Create SD Card with two partitions: Boot(FAT32+Bootable) and Root(EXT4) Refer this Link.
Copy
bootcontent fromrdf0428-zcu104-vcu-hdmi-roi-2020-2/image/sd_card/bootto Boot partition in SD CardExtract
rootfs.ext4fromrdf0428-zcu104-vcu-hdmi-roi-2020-2/image/sd_card/rootto Root partition in SD Card usingBoot the board with Flashed SD Card
...
To Create SD Card with two partitions: Boot(FAT32+Bootable) and Root(EXT4) Refer this Link.
For Build Flow refer this steps and copy mentioned generated dpu build images
bd.hwh BOOT.BIN boot.scr dpu.xclbin Image system.dtbinto BOOT partition of the SD card and extract generatedrootfs.ext4into ROOT partition of SD CardCopy the mentioned
bootcontentconfig, vitis, autostartstart.sh, setup.shfromrdf0428-zcu104-vcu-hdmi-roi-2020-2/image/sd_card/boot/directory to Boot partition in SD CardBoot the board with Flashed SD Card
All the required Vitis AI packages are already available in rdf0428-zcu104-vcu-hdmi-roi-2020-2/image/sd_card/boot/vitis directory which needs to be installed using start.sh script after boot-up. Please wait till target setup complete and Vitis AI packages are installed.
...
For all 1080p30 commands replace width from 3840 to 1920 and height from 2160 to 1080
1.7 Build Flow
Refer below link to download the VCU HDMI ROI package.
For zcu104 detailed Build flow please refer to this link.
For ZCU104 Board, replace
zcu106withzcu104in above refer link.
...