...
Code Block |
---|
xgpiops_polled_example.c OUTPUT: GPIO Polled Mode Example Test Data read from GPIO Input is 0x0 Successfully ran GPIO Polled Mode Example Test xgpiops_intr_example.c OUTPUT: GPIO Interrupt Example Test Push Switch button to exit Successfully ran GPIO Interrupt Example Test |
Change Log
Directory | Description |
---|---|
src | Driver source files |
examples | Example applications that show how to use the driver features |
doc | Provides the API and data structure details |
data | Driver .tcl and .mdd file |
Driver Implementation
For a full list of features supported by this IP, please refer Chapter 27: Real Time Clock in Zynqmp Trm
Features
Controller Features
Versal
The two GPIO controllers have the same functionality. There are a total of 174 channels in two
controllers:
PMC GPIO controller:Two banks (26 channels each) to PMC MIO
Two banks (32 channels each) to PL EMIO
LPD GPIO controller:
One bank (26 channels) to LPD MIO
One bank (32 channels) to PL EMIO
The function of each GPIO can be dynamically programmed on an individual or group basis.
Enable, bit or bank data write, output enable and direction controls.
Programmable interrupts on individual GPIO basis
Status read of raw and masked interrupt.
Selectable sensitivity: Level-sensitive (High or Low) or edge-sensitive (positive, negative, or both).
ZYNQMP
- 78 GPIO signals for device pins.
- Routed through the MIO multiplexer.
- Outputs are 3-state capable.
- 288 GPIO signals between the PS and PL through the EMIO interface.
- 96 inputs.
- 192 outputs (96 true outputs and 96 output enables).
- I/O interface is organized into 6 banks(3 MIO and 3 EMIO)
- Interface control registers are grouped by bank {0:5}.
- Input values are read using the six DATA_RO_x registers.
- The function of each GPIO can be dynamically programmed on an individual or group basis.
- Enable, bit or bank data write, output enable and direction controls.
- Programmable interrupts on individual GPIO basis.
- Status read of raw and masked interrupt.
- Selectable sensitivity: Level-sensitive (High or Low) or edge-sensitive (positive, negative, or both).
ZYNQ
- 54 GPIO signals for device pins
- Routed through the MIO multiplexer.
- Outputs are 3-state capable.
- 192 GPIO signals between the PS and PL via the EMIO interface.
- 64 Inputs
- 128 Outputs(64 true outputs and 64 output enables).
- The function of each GPIO can be dynamically programmed on an individual or group basis.
- Enable, bit or bank data write, output enable and direction controls.
- Programmable interrupts on individual GPIO basis.
- Status read of raw and masked interrupt.
- Selectable sensitivity: Level-sensitive (High or Low) or edge-sensitive (positive, negative, or both).
Driver Features
The Gpiops Standalone driver support the below things.
- All controller features supported.
Known Issues and Limitations
- None
Example Applications
Refer to the driver examples directory for various example applications that exercise the different features of the driver. Each application is linked in the table below. The following sections describe the usage and expected output of the various applications. These example applications can be imported into the Vitis IDE from the Board Support Package settings tab.Links to Examples
Examples Path:
https://github.com/Xilinx/embeddedsw/tree/master/XilinxProcessorIPLib/drivers/gpiops/examples
Test Name | Example source | Description |
---|---|---|
Polled | xgpiops_polled_example.c | This example provides the usage of API's for reading/writing to the individual pins. |
Interrupt | xgpiops_intr_example.c | This example shows the usage of the driver in interrupt mode. It uses the interrupt capability of the GPIO to detect push button events and set the output LED based on the input. |
Example Application Usage
GpioPs examples
Expected Output
Code Block |
---|
xgpiops_polled_example.c
OUTPUT:
GPIO Polled Mode Example Test
Data read from GPIO Input is 0x0
Successfully ran GPIO Polled Mode Example Test
xgpiops_intr_example.c
OUTPUT:
GPIO Interrupt Example Test
Push Switch button to exit
Successfully ran GPIO Interrupt Example Test
|
Change Log
2023.1
https://github.com/Xilinx/embeddedsw/blob/xilinx_v2023.1/doc/ChangeLog#L242
2022.2
https://github.com/Xilinx/embeddedsw/blob/xlnx_rel_v2022.2/doc/ChangeLog#L100
2022.1
None
2021.2
None
...