...
The Xilinx Certified Ubuntu 20.04 LTS for Xilinx Devices image is an official Ubuntu image with certified hardware support for select Xilinx evaluation boards. This page details how to boot and use the official desktop environment image released by Canonical for Xilinx ZCU102, ZCU104, and ZCU106 evaluation boards. Support for the Kria KV260 Starter Kit is coming soon! You can read more about certified Ubuntu hardware here.
...
If you are using the Gnome 3 graphical interface, you can configure networking via the Network Settings options in the GUI.
...
Anchor | ||||
---|---|---|---|---|
|
Note |
---|
This step requires Internet access. If you haven’t already set up Internet access, please follow the instructions in the Network Setup section above |
Before diving into the demos, the Certified Ubuntu on Xilinx Devices environment needs to have some additional resources downloaded and installed. The primary utility for switching between configurations and managing the system is called xlnx-config
. The xlnx-config
utility is deployed as a Snapcraft-compatible snapsnap and which is available from the Canonical Snap store (http://snapcraft.io).
For more information about using xlnx-config
, please refer to the xlnx-config wiki page.
...
Running the Kria KV260 Demos
COMING SOON!
Creating a Custom Hardware Platform
COMING SOON!
Getting Help
Xilinx recommends posting on the Xilinx Embedded Linux Forum for any questions related to the Certified Ubuntu 20.04 LTS on Xilinx Devices release.
...
Anchor | ||||
---|---|---|---|---|
|
COMING SOON!
Anchor | ||||
---|---|---|---|---|
|
...