2023.2 Release
This page contains documentation and release information corresponding to AMD Adaptive SoC and FPGA software version 2023.2.
Table of Contents
What's New
What's New in Vivado 2023.2
What’s New in Vitis 2023.2
Documentation
Device Family | Wiki Page | Technical Reference Manual | Software Developer's Guide | Design Hub | |
|---|---|---|---|---|---|
Versal Adaptive SoC | |||||
Zynq UltraScale+ MPSoC | |||||
Kria SOM | |||||
Zynq 7000 SoC |
Downloads
These pre-built images, source code and configurations are provided for demonstration purposes only and might not be suitable outside of a development environment, including for production purposes.
Prior to production and deployment of any Linux-based system, it is recommended that all relevant security updates are applied, and a mechanism for in-field updates is made available throughout the lifetime of the relevant product
The following files are provided for each production board:
SD Image zip file - Contains the .wic SD card image for the board platform.
BSP Download - This BSP file is used to initialize a PetaLinux project for the given board
Prebuilt firmware - The boot firmware is available pre-built in a Git repository enabling for easy custom reconstruction of boot artifacts. The full set of prebuilt firmware can be cloned from the repo using the tag xilinx_v2023.2 . Instructions to rebuild can be found here.
Device Family | Board Info | SD Image .zip file | SD Image MD5 | BSP Download (direct link) | Prebuilt Firmware |
|---|---|---|---|---|---|
Versal Adaptive SoC | VCK190 (Production silicon) |
| |||
VMK180 (Production silicon) |
| ||||
VPK120 (Production silicon) |
| ||||
VPK180 (Production silicon) |
| ||||
VHK158 (Production silicon) |
| ||||
VEK280 (Production silicon) | a1d33a13556af6b786b6f30284f3c3ab | ||||
Zynq UltraScale+ MPSoC |
| ||||
| |||||
| |||||
| |||||
|
| ||||
Kria |
| ||||
| |||||
| |||||
| |||||
| |||||
Zynq 7000
|
|
| |||
|
To download the files referenced above, you must complete user registration at xilinx.com.
Package Feeds
The pre-built images for these boards have DNF package feeds.
Please see the instructions on how to use the packages here: Install and run applications through DNF on target
Release Details
PetaLinux Update Release Notes
https://support.xilinx.com/s/article/000035572?language=en_US
Open Source Release Notes
2023.2+Release+Notes+for+Open+Source+Components
Source Code and Licensing
Licenses and Source Code Information for 2023.2 PetaLinux BSPs
Component Versions
Feature/Product | Version | Description |
|---|---|---|
FSBL | 2023.2 | The First Stage Boot Loader (FSBL) used to generate the boot.bin file is based on the 2023.2 release of the AMD Adaptive SoC and FPGA tools. |
U-Boot | 2023.01 | The release is based on a v2023.01 U-Boot created from the xlnx_rebase_v2023.01_2023.2 tag. More details about configuring, building and running U-Boot are located on the U-Boot and Build U-Boot pages. |
Linux | 6.1 | The release is based on a 6.1 Linux kernel created from the xlnx_rebase_v6.1_LTS_2023.2 tag. |
Device Tree Generator | 2023.2 | For Vivado 2023.2, please use the new device-tree generator available in GitHub - Xilinx/device-tree-xlnx at xlnx_rel_v2023.2 repository. |
Device Tree Compiler | v1.6.1 | Latest Stable Release |
Build Tool Version | GCC 12.2 | Aligns with Linaro upstream latest |
Langdale 4.1 |
| |
Xen | 4.17 |
|
ATF | 2.8 |
|
Git Tags
The AMD Adaptive Soc and FPGA Git repositories are tagged as follows:
U-Boot: xlnx_rebase_v2023.01_2023.2
Linux: xlnx_rebase_v6.1_LTS_2023.2
Yocto Layers
meta-xilinx: GitHub - Xilinx/meta-xilinx at rel-v2023.2
meta-petalinux: GitHub - Xilinx/meta-petalinux at rel-v2023.2
meta-xilinx-tools: GitHub - Xilinx/meta-xilinx-tools at rel-v2023.2
Using the Prebuilt Linux Image Archives
This section only applies to boards with a prebuilt Linux image. For Kria, please refer to the K26 Wiki.
Preparing the SD card
It is recommended to use a tool such as Balena Etcher to write the wic image to the SD card. You can point Etcher to the downloaded .zip file and it will automatically extract and burn the compressed image.
For more information about SD card management, please refer to the UG1144 section Booting PetaLinux Image on Hardware with an SD Card.
Booting the Board
Set the boot mode DIP switches on your board to SD boot. You can refer to the following page to set the switches for each card: Board bring up using pre-built images
Login Credentials
By Default, Auto login is not enabled, the user must enter the username as “petalinux” and the password needs to be set by the user.
To enable Autologin, follow the steps mentioned in https://docs.xilinx.com/r/en-US/ug1144-petalinux-tools-reference-guide/PetaLinux-Auto-Login
© Copyright 2019 - 2022 Xilinx Inc. Privacy Policy