Features
Zynq US+:
- Provide capability to write/modify Boot environment variables in to uenv.txt and save it on SD/eMMC.
- Provide Support for ZCU106 Board.
- Add clock driver support.
- U-boot to support 1-bit and 2-bit mode QSPI flash programming in single and stacked modes for Zynq US+.
- u-boot support for Ethernet to connect via PL to SFP+.
- Provide UBIFS file system support for QSPI in U-Boot.
- Provide eMMC HS200 mode support in U-Boot.
- SD 3.0 support in u-boot.
- Add encryption and authentication security functionality to U-boot for ZU+ applications.
- Support added for
...
- the devices in the table below:
| Device Type | Device |
| eMMC | EMMC64G-W525 |
| eMMC | MTFC4GMVEA-4M IT |
| Nand | S34ML01G1 |
| Nand | MT29F2G08AB |
| QSPI | N25Q64 |
| QSPI | MX25L25645G |
| QSPI | MX25L51245G |
| QSPI | MX66L1G45G |
| QSPI | MT25QL512A |
| QSPI | N25Q256 |
| QSPI | S25FL128S |
| QSPI | MT25QL02G (and MT25QU02G) |
Zynq:
- U-boot to support 1-bit and 2-bit mode QSPI flash programming in single and stacked modes for Zynq.
Microblaze:
- Provide Non-Processor mode configuration support in AXI_Ethernet Driver in U-Boot.
Misc:
- Update to mainline version 2017.1.
Answer Records
| Module Name | AR Title | AR Link |
| Flash parts / Zynq | Zynq-7000 AP SoC - What devices are supported for configuration? | https://www.xilinx.com/support/answers/50991.html |
| Flash parts / ZynqMP | Zynq UltraScale+ MPSoC - What devices are supported for configuration? | https://www.xilinx.com/support/answers/65463.html |