This is a starting resource for the SmartLynq+ Module and it does not replace the official documentation of the SmartLynq+ Module that is on Xilinx.com 

...

Once the power supply is connected to the SmartLynq+ Module and turned ON, a green power status LED should glow to indicate successful power-on and then followed by Boot

...

Embedded Design Tutorial

A System Design Example for High-Speed Debug Port with SmartLynq+ Module is available for users to get started,  The EDT guides users through building a system based on Versal devices that utilizes both the SmartLynq+ Module and High-Speed Debug Port (HSDP). It also demonstrates the steps to setup the SmartLynq+ Module and download a Linux image using either JTAG or High-Speed Debug Port.

Versal EDT - https://github.com/Xilinx/Embedded-Design-Tutorials/tree/master/docs/Introduction/Versal-EDT/docs

SmartLynq+ Module EDT - https://github.com/Xilinx/Embedded-Design-Tutorials/blob/master/docs/Introduction/Versal-EDT/docs/6-system-design-example-HSDP.rst

This EDT section builds on chapter 5 6 and walks through the basic steps to:

...