...
1)The IDT/Renasas Clocking device is used for generation of the ToD clock (TS clock) and the GT Reference clock for Ethernet port.
This needs to be configured using BEAM tool.
2)The TRD design was created for supporting PTP. On every RX packet, 16 bytes are inserted in the beginning of the packet in-line.
This is done between MRMAC and MCDMA. For non-PTP packets, the SW discards this timestamp.
It contains some PTP functionality enabled by default on RX packets that uboot cannot recognize.
Known Issues for 2024.1 Release:
1) Specifically 9, 10, 11, 2007 bytes and rootfs,ubi were not working. Only less than 2K block and ubifs is failing currently, rest everything is fine for MX66UM2G45G flash.
Release Notes
...