...
Connect to a power source and turn on the board power using switch SW15.
The board powers on and boots from the SD card using the programmed images.
The DONE and INIT_B LEDs will turn green
It takes approximately 60s for the operating system to fully boot and for the embedded software to start.
...
For improved performance, power consumption reduction, and avoid windowing, we can use the settings below which distribute the output of the ADC and DAC PLL. Please note that the ADC and DAC sampling rate must be an integer multiple of the reference clock input when using the internal PLL.
...
Related Links
For more information on the ZU49DR silicon used on the ZCU216 board or any other RFSoC silicon visit https://www.xilinx.com/products/silicon-devices/soc/rfsoc.html
...