Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This page describes the steps for creating and building a 2019.1 PetaLinux project for use with the ZCU111 RFSoC Evaluation tool.

Table of Contents

Table of Contents
excludeTable of Contents

Overview

The ZCU111 RFSoC Eval Tool has three designs based on the functionality. A detailed information about the three designs can be found from the following pages.

For more details on ZU+ RFSoC RF Data Converter Evaluation Tool refer to ZCU111 RFSoC RF Data Converter Evaluation Tool Getting Started Guide.

Table of Contents

Overview

This tutorial includes the following:-

  • Steps to source and setup the petalinux tool for building the images.  

  • Step-by-step tutorial to build all the images using the petalinux tool.  

  • Information about the relevant kernel and device tree patches as well as the applications within the designs. 

For more details on ZU+ RFSoC RF Data Converter Evaluation Tool refer to ZCU111 RFSoC RF Data Converter Evaluation Tool Getting Started Guide.

Building the Linux Image

Installation

PetaLinux consists of three key elements: pre-configured binary bootable images, fully customizable Linux for the Xilinx device, and PetaLinux SDK which includes tools and utilities to automate complex tasks across configuration, build, and deployment.Visit the PetaLinux wiki page for more details. Refer to the PetaLinux Tool Documentation (UG1144) for installation.

Procedure to build the Linux Image

The following section provides the steps to build all the images using the petalinux tool. 

...

Code Block
% cp BOOT.BIN image.ub $DCET_HOME/sd-card

Modifications on top of 2019.1 released BSP

Below are the modification in this TRD for linux-kernel, rfdc drivers, rftool and rfdc example application, on top of 2019.1 petalinux released BSP. For more details on patch information please refer to http://xkb/pages/72/72405.aspx.

...