/
Building Xen Hypervisor with Petalinux 2018.3
Building Xen Hypervisor with Petalinux 2018.3
Table of Contents
Overview
The guide below shows you how to build Xen, boot Xen and then run some example configurations on ZU+. The steps below use PetaLinux and assume you have some knowledge of using PetaLinuxBefore starting you need to create a PetaLinux project. It is assumed that a default PetaLinux reference design is used unchanged in these instructions.
The default PetaLinux configuration has images ready to do boot Xen, these are the pre-built images. You can use those or you can manually edit receipes a
The default PetaLinux configuration has images ready to do boot Xen, these are the pre-built images. You can use those or you can manually edit receipes a