/
Zynq UltraScale MPSoC Base TRD 2018.1 - Design Module 1

Zynq UltraScale MPSoC Base TRD 2018.1 - Design Module 1

Sept 24, 2018

 

Zynq UltraScale MPSoC Base TRD 2018.1 - Design Module 1

 

Table of Contents

Design Overview

Design Components

Build Flow Tutorials

Petalinux BSP

Run Flow Tutorial

References

Design Overview


This design module showcases the following:

  • Boot APU only

    • FSBL, ATF, U-boot, PMU-FW

    • APU OS: SMP Linux

  • Ethernet via FTP/SCP

  • Serial console via UART0

  • File system via SD, USB or SATA

  • Standard Linux applications on rootfs





Design Components


  • petalinux_bsp

    • zynqmp_fsbl

    • pmufw

    • bl31

    • u-boot

    • kernel

    • device tree (zcu102-base-dm1.dtsi)

    • rootfs



Build Flow Tutorials


Petalinux BSP


This tutorial shows how to build the Linux image and boot image using the PetaLinux build tool.

  • Configure the PetaLinux project.

    % cd $TRD_HOME/petalinux % petalinux-create -t project -s zcu102-base-trd.bsp -n bsp % cd bsp % petalinux-config --get-hw-description=$TRD_HOME/zcu102_base_trd/sw/a53_linux/a53_linux/prebuilt --oldconfig


    Note: This step will result in a warning message that can be safely ignored (AR#71172)

    WARNING: Usage of HDF is going to be deprecated in future releases.Please use DSA(Device Support Archive) instead.

  • Select the device-tree matching design module 1 and build all Linux image components

    % cd $TRD_HOME/petalinux/bsp/project-spec/meta-user/recipes-bsp/device-tree/files/ % cp zcu102-base-dm1.dtsi system-user.dtsi % petalinux-build

  • Create a boot image.

    % cd $TRD_HOME/petalinux/bsp/images/linux % petalinux-package --boot --bif=../../project-spec/boot/dm1.bif --force

  • Copy the generated boot image and Linux image to the dm1 SD card directory.

    % mkdir -p $TRD_HOME/sd_card/dm1 % cp BOOT.BIN image.ub $TRD_HOME/sd_card/dm1



Run Flow Tutorial


  • See here for board setup instructions.

  • Copy all the files from the $TRD_HOME/sd_card/dm1 SD card directory to a FAT formatted SD card.

  • Power on the board to boot the images; make sure all power rail LEDs are lit green.

  • The user can now see Linux boot on the serial console:



References




Continue with Design Module 2.
Return to the Design Tutorials Overview.