Zynq UltraScale+ MPSoC VCU TRD 2021.1
This page provides an overview of the 2021.1 version of the Zynq UltraScale+ MPSoC VCU TRD. This TRD is made up of several design modules. A description of the design modules and links to the individual design module pages can be found in the Design Modules below.
This page complements the TRD User Guide: UG1250
Table of Contents
1 Revision History
Change Log:
Updated all projects, IPs, and tools versions to 2021.1
Updated PL DDR SDI design with HLG support
Updated PCIe design with more encoder parameters support from host to target
Updated PL DDR HDR10 design with both PL DDR version v1 and v2
2 Overview
This is the main page of VCU TRD wiki, which has links to redirect wiki pages corresponding to individual design modules. It also explains the complete feature list and the supported resources of all the designs. TRD package web link is provided for the user to download. This page also gives information on required software tools, IP licenses.
The Zynq® UltraScale+™ MPSoC Video Codec Unit (VCU) Targeted Reference Design (TRD) consists of an embedded video encoding/decoding application that runs on the Processing System (PS). The overall functionality of the TRD is partitioned between the Processing System (PS), Video Codec Unit, and Programmable Logic (PL) for optimal performance.
The primary goal of this TRD is to demonstrate the capabilities of the VCU core which is an integrated hard block present in Zynq UltraScale+ MPSoC EV devices. The TRD serves as a platform for the user to tune the performance parameters of VCU and arrives at an optimal configuration for encoder and decoder blocks for their specific use case. The TRD uses Vivado IP Integrator (IPI) flow for building the hardware design and Xilinx Yocto PetaLinux flow for software design. It uses Xilinx IPs and software drivers to demonstrate the capabilities of different components.
2.1 TRD Support
The TRD supports the following video interfaces.
Sources up-to 4K(3840 x 2160/4096 x 2160)-60FPS:
Test pattern generator (TPG) implemented in the PL.
HDMI-Rx capture pipeline implemented in the PL.
MIPI CSI-2 Rx capture pipeline implemented in the PL.
File source (SD card, USB storage, SATA hard disk).
Stream-In from network or internet.
SDI-Rx capture pipeline implemented in the PL.
Sinks up-to 4K(3840 x 2160/4096 x 2160)-60FPS for HDMI/SDI and 4K-30FPS for Display Port
DP Tx display pipeline in the PS.
HDMI-Tx display pipeline implemented in the PL.
SDI-Tx display pipeline implemented in the PL.
VCU Codec
Video Encode/Decode capability using VCU hard block in PL
H.264/H.265 encoding
Encoder/decoder parameter configuration using OMX interface
Demonstrate the multi-stream capability of VCU at 4k 60 Hz throughput
Audio Codec
Opus 2 channel 48KHz
Streaming Interfaces
1G Ethernet PS GEM
10G PL Ethernet
Serial Communication
PCIe(Peripheral Component Interconnect Express)
Video format
NV12
NV16
XV15
XV20
The below figure shows the TRD block diagram. It consists of all the Design Modules. The components of each design module are highlighted in unique colors in the diagram. The remaining blocks are common to all design modules as shown.
2.2 Design Modules
The VCU TRD 2021.1 version consists of Ten design-modules as described below. Individual links below will redirect to the corresponding wiki pages and build and run the flow of individual designs modules.
Design Module # | Project Name | TRD Pre-built images | Description |
---|---|---|---|
1 | vcu_multistream_nv12 | Multi-stream design supporting HDMI-Rx, TPG, MIPI, HDMI-Tx, DP along with showcasing capabilities of VCU | |
2 | vcu_sdi_xv20 | Design showcasing HLG/Non-HLG Video + 2/8 channels Audio Capture and Display through SDI interface along with the capabilities of VCU with PL DDR supporting 4:2:2 10 bit XV20 format encoding from PS DDR and decoding from PL DDR | |
3 | vcu_audio | Design supporting I2S and HDMI Audio with video capture of HDMI-Rx/MIPI-Rx and showcasing capabilities of VCU | |
4 | vcu_10g | Design showcasing Video stream over 10G Ethernet along with the capabilities of VCU | |
5 | vcu_pcie | Design to showcase file transfer from HOST(x86) machine over PCIe interface and encode, decode or transcode it on ZCU106 board having VCU connected as PCIe endpoint and write back the encode, decoded or transcoded data to the HOST machine. | |
6 | vcu_plddrv1_hdr10_hdmi | VCU based HDMI design to showcase encoding with PS DDR and decoding with PL DDR. It supports the reception and insertion of HDR10 static metadata for HDMI and also DCI4K Feature. | |
7 | Xilinx Low Latency PS DDR NV12 HDMI Audio Video Capture and Display | vcu_llp2_hdmi_nv12 | VCU based HDMI audio video design to showcase ultra low latency support using Sync IP, encoding and decoding with PS DDR for NV12 format |
8 | Xilinx Low Latency PL DDR NV16 HDMI Video Capture and Display | vcu_llp2_hdmi_nv16 | VCU based HDMI design to showcase ultra low latency support using Sync IP, encoding with PS DDR and decoding with PL DDR for NV16 format |
9 | Xilinx Low Latency PL DDR XV20 HDMI Video Capture and Display | vcu_llp2_hdmi_xv20 | VCU based HDMI design to showcase ultra low latency support using Sync IP, encoding with PS DDR and decoding with PL DDR for XV20 format |
10 | Xilinx Low Latency PL DDR XV20 SDI Video Capture and Display | vcu_llp2_sdi_xv20 | VCU based SDI design to showcase ultra low latency support using Sync IP, encoding with PS DDR and decoding with PL DDR for XV20 format |
11 | Quad Sensor MIPI CSI Video Capture and HDMI Display | This Design Module is discontinued in 2021.1 VCU TRD release. |
VCU TRD User guide has more details about the list of features, software architecture, and hardware architecture of individual designs.
3 Software Tools and System Requirements
3.1 Hardware
Required:
ZCU106 evaluation board (rev C/D/E/F/1.0) with power cable
Monitor with DisplayPort/HDMI input supporting 4096x2160 or 3840x2160 or 1920x1080 resolution
HDR10 supported Monitor with HDMI input supporting 4096x2160, 3840x2160 or 1920x1080 resolution
Display Port cable (DP certified)
HDMI cable 2.0 certified
Class-10 SD card
HDMI Receiver - NVIDIA SHIELD Pro for 4kp60, Panasonic Lumix GH5S for DCI 4kp60
HDMI Receiver - GooBang Doo ABOX 2017 player with the resolution set to 4KP30
USB mouse
Ethernet cable
SFP+ optical module
Optical fiber cable for 10G
SDI Receiver - Black Magic Teranex Mini HDMI to 12G converter / AJA HA5-12G HDMI to 12G SDI converter
SDI Transmitter - Black Magic Teranex Mini 12G to HDMI converter / AJA HI5-12G 12G SDI to HDMI converter
Digilent PMOD Audio card [I2S2]
Phabrix Qx Analyzer
3.5mm Aux Cables and Speakers.
UBUNTU HOST machine with PCIe slot
Optional:
USB pen drive formatted with the FAT32 file system and hub
SATA drive formatted with the FAT32 file system, external power supply, and data cable
3.2 Software Tools
Required:
Linux host machine for all tool flow tutorials (see UG1144 for detailed OS requirements)
Petalinux Tools version 2021.1 (see UG1144 for installation instructions)
VIVADO Design suite version 2021.1
Git a distributed version control system
Serial terminal emulator e.g. teraterm
3.3 Download, Installation, and Licensing
The Vivado Design Suite User Guide explains how to download and install the Vivado® Design Suite tools, which include the Vivado Integrated Design Environment (IDE), High-Level Synthesis tool, and System Generator for DSP. This guide also provides informati