Table of Contents
Linux Versal FlexNoc Driver. The following section describes the hardware as well as the software design.
Xilinx FlexNoc Interconnect has counters to monitor various interfaces.
There are 2 instances of the FlexNoC one in the LPD and one in the FPD.
Kernel Configuration
To enable FlexNoc driver in the kernel, the following configuration options need to be enabled:
|
The FLexNOc driver gives the user access to the various counters to monitor the interfaces.
|
Current Supported Features:
Temperature Channels:
FPD and LPD Monitors.
Counter reading
Reading a counter value:
_
|
Port Selection:
The port select Options
Below are the values that are there for the various paths
RPU_clk:
TracePortSel 0 :Datapath Link:/lpd_afifs_axi - 0x8000_0000
TracePortSel 1 :Datapath Link:/lpd_ocm - 0xFFFD_0000
TracePortSel 2 :Datapath Link:/lpd_ocmext - 0xFE80_0000
TracePortSel 3 :Datapath Link:/lpd_pmc_rpu_axi0 - 0x0000_0000
Lpdswitch_main_clk:
TracePortSel 0 :Datapath Link:/lpdfpd_axi - 0xB000_0000
TracePortSel 1 :Datapath Link:/prot_xppu - 0xFC00_0000
f14566d - New driver added
2021.1
None
2021.2
None
2022.1
None
2022.1
d27d39925b95 -Deprecate the driver
2023.1
None
2023.2
Driver is deleted.
Not mainlined