`This page provides all the information related to Design Module 3 - VCU TRD Multi stream Audio-Video design.
...
For the overview, software tools, system requirements, and design files follow the link below:
The below figure shows the HDMI, MIPI Video Capture along with HDMI, I2S Audio Capture and HDMI Display with Audio design hardware block diagram.
...
Refer below link for Board Setup
I2S Audio. signals from MPSoC PL fabric are connected to PMOD0 GPIO Header (J55 - right angle female connector )
PMOD I2S2 Add on card connects to J55 connector and its Master/Slave select jumper (JP1) should be placed into the Slave (SLV) position
1.2 Run Flow
The TRD package is released with the source code, Vivado project, Petalinux BSP, and SD card image that enables the user to run the demonstration. It also includes the binaries necessary to configure and boot the ZCU106 board. Prior to running the steps mentioned in this wiki page, download the TRD package and extract its contents to a directory referred to as TRD_HOME which is the home directory.
Refer below link to download all TRD contents.
Refer Section 4.1 : Download the TRD of
Zynq UltraScale+ MPSoC VCU TRD 2020.1wiki page to download all TRD contents.
TRD package contents are placed in the following directory structure. The user needs to copy all the files from the $TRD_HOME/images/vcu_audio/ to FAT32 formatted SD card directory.
...
Refer below link for detailed run flow steps
1.3 Build Flow
Refer below link for Build Flow
...
2 Other Information
2.1 Known Issues
...