Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
languagecpp
/dts-v1/;
/plugin/;
/ {
	fragment@0 {
		target = <&fpga_full>;
		overlay0: __overlay__ {
			#address-cells = <2>;
			#size-cells = <2>;
			firmware-name = "system.bit.bin";
			resets = <&zynqmp_reset 116>;
		};
	};
	fragment@1 {
		target = <&amba>;
		overlay1: __overlay__ {
			afi0: afi0 {
				compatible = "xlnx,afi-fpga";
				config-afi = < 0 0>, <1 0>, <2 0>, <3 0>, <4 0>, <5 0>, <6 0>, <7 0>, <8 0>, <9 0>, <10 0>, <11 0>, <12 0>, <13 0>, <14 0xa00>, <15 0x000>;
			};
		};
	};
	fragment@2 {
		target = <&amba>;
		overlay2: __overlay__ {
			#address-cells = <2>;
			#size-cells = <2>;
			axi_intc_1: interrupt-controller@a00d0000 { /* Top node */
				#interrupt-cells = <2>;
				clock-names = "s_axi_aclk";
				clocks = <&clk_wiz_0 0>;
				compatible = "xlnx,axi-intc-4.1", "xlnx,xps-intc-1.00.a";
				interrupt-controller ;
				interrupt-names = "irq";
				interrupt-parent = <&axi_intc_0>;
				interrupts = <1 2>;
				reg = <0x0 0xa00d0000 0x0 0x10000>;
				xlnx,kind-of-intr = <0x360>;
				xlnx,num-intr-inputs = <0xe>;
			};
			axi_iic_0: i2c@a0000000 {
				#address-cells = <1>;
				#size-cells = <0>;
				clock-names = "s_axi_aclk";
				clocks = <&clk_wiz_0 0>;
				compatible = "xlnx,axi-iic-2.1", "xlnx,xps-iic-2.00.a";
				interrupt-names = "iic2intc_irpt";
				interrupt-parent = <&gic>;
				interrupts = <0 91 4>;
				reg = <0x0 0xa0000000 0x0 0x1000>;
			};
			axi_iic_1: i2c@a0008000 {
				#address-cells = <1>;
				#size-cells = <0>;
				clock-names = "s_axi_aclk";
				clocks = <&clk_wiz_0 0>;
				compatible = "xlnx,axi-iic-2.1", "xlnx,xps-iic-2.00.a";
				interrupt-names = "iic2intc_irpt";
				interrupt-parent = <&axi_intc_1>;
				interrupts = <1 2>;
				reg = <0x0 0xa0008000 0x0 0x1000>;
			};
		};
	};
};

...