...
The Xilinx Certified Ubuntu 20.04 LTS for Xilinx Devices image is an official Ubuntu image with certified hardware support for select Xilinx evaluation boards. This page details how to boot and use the official desktop environment image released by Canonical for Xilinx ZCU102, ZCU104, and ZCU106 evaluation boards as well as the Kria KV260 Starter Kit. You can read more and download the certified Ubuntu hardware here.
Info |
---|
For the 22.04 Jammy Jellyfish release, please refer to the 22.04 getting started page: Getting Started with Certified Ubuntu 22.04 LTS for Xilinx Devices |
Table of Contents
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
...
For general information about how the boot process works for the ZCU10x image, please refer to Booting Certified Ubuntu 20.04 LTS for Xilinx Devices. For information on how the boot process works for the Kria KV260 Starter Kit, please refer to the Kria K26 SOM wiki page.
Info |
---|
NOTE: There are important differences for using the Certified Ubuntu on Xilinx Devices release on the ZCU104 board. Please see the Special Considerations for the ZCU104 Evaluation Board section. |
...
|
After installing the xlnx-config snap, you can use it to set up the remainder of the system by executing the following command in a terminal:
Code Block |
---|
$ xlnx-config.sysinit |
Info |
---|
NOTE: The Xilinx team updates the |
...
|
Info |
---|
--channel is required to specify the 1.x track that is compatible with the Ubuntu 20.04 release. If you don’t specify the 1.x track, the 22.04 compatible snap will be used, and you will get an error. |
Info |
---|
For Kria users who are familiar with the |
The heart of the ZCU10x demonstration experience is the Xilinx Deep Learning Processing Unit (DPU). In addition to setting up the system, the xlnx-config
snap provides the DPU via dpu.xclbin
to other snaps that depend on it. The xlnx-config
snap also provides infrastructure which allows users to package up other hardware platforms to enable other custom development and demonstration workflows. For more information about creating and installing custom platforms via xlnx-config
, see the Usage Example section on the xlnx-config developer page.it. The xlnx-config
snap also provides infrastructure which allows users to package up other hardware platforms to enable other custom development and demonstration workflows. For more information about creating and installing custom platforms via xlnx-config
, see the Usage Example section on the xlnx-config developer page.
After installing the xlnx-config snap, you can use it to set up the remainder of the system by executing the following command in a terminal:
Code Block |
---|
$ xlnx-config.sysinit |
Note |
---|
In some cases when immediately running sysinit after the first boot, users have reported running into “waiting for cache lock” issues when the sysinit script attempts to install packages. This is due to the standard Ubuntu “unattended upgrades” process starting up before sysinit. If this happens, the systinit script will take much longer than usual while it waits for permission to begin installing packages. In certain situations, you may have to run xlnx-config.sysinit again. For more information about this issue, you can refer to the following page: |
xlnx-config.sysinit
takes care of the following items, depending on the system it's run on:
Install the Custom Xilinx gstreamer
...
Evaluation Board | Reference Hardware Platform |
---|---|
ZCU102 | |
ZCU104 | |
ZCU106 | |
Kria KV260 Starter Kit |
Info |
---|
The KV260 will boot into Ubuntu without loading a bitstream. See Running the Kria KV260 Demos below for more information. |
...
For even more tips and tricks, see the Tips & Tricks page.
General Unsupported Usage Exceptions
...
Anchor | ||||
---|---|---|---|---|
|
COMING SOON!
Anchor | ||||
---|---|---|---|---|
|
...
Adapter Model | Status | Where to Purchase |
---|---|---|
JSAUX JSESNZ4KDP2HDF | Compatible | |
J5create JDA158 | Compatible | J5Create Direct , Amazon.com , Staples , Best Buy , NewEgg.com |
IVANKY-DP11 | Incompatible | |
ICZI IZEC-A10-IT | Incompatible | |
Snowkids DP to HDMI Cable | Incompatible |
Related Links
Building Vitis-AI Sample Applications on Certified Ubuntu 20.04 LTS for Xilinx Devices
https://xilinx-wiki.atlassian.net/wiki/pages/resumedraft.action?draftId=2105376824
Tips & Tricks for Certified Ubuntu 20.04 LTS on Xilinx Devices
Rebuilding the Certified Ubuntu for Xilinx Devices 20.04 LTS Kernel from Source
Using the Certified Ubuntu on Xilinx Devices image with a SATA hard disk
...