...
This design is based on the ZCU106 VCU RDMI HDMI ROI TRD which can be found at the following link
The two designs are functionally equivalent, please refer to the page linked above for details related to the system architecture, gstreamer plugin info, DPU configuration and usage, etc. The sections below provide direct links to the relevant information.
...
To Create SD Card with two partitions: Boot(FAT32+Bootable) and Root(EXT4) Refer this Link.
For Build Flow refer this steps and copy mentioned generated dpu build images
bd.hwh BOOT.BIN boot.scr dpu.xclbin Image system.dtbinto BOOT partition of the SD card and extract generatedrootfs.ext4into ROOT partition of SD CardCopy the mentioned
bootcontentconfig, vitis, autostartstart.sh, setup.shfromrdf0428-zcu104-vcu-hdmi-roi-2020-2/image/boot/directory to Boot partition in SD CardBoot the board with Flashed SD Card
...
For all 1080p30 commands replace width from 3840 to 1920 and height from 2160 to 1080
1.7 Build Flow
...
For zcu104 detailed Build flow please refer to this link.
For ZCU104 Board, replace
zcu106withzcu104in above refer link.
...