Table of Contents
Table of Contents | ||
---|---|---|
|
Introduction
The AXI USB device IP is an USB device controller IP. It has no support for OTG mode. This IP can be instantiated on FPGA or Zynq or ZynqMP PL. This page describes the usage of AXI USB device IP standalone driver.
How to Enable
Source Path for the driver:https://github.com/Xilinx/embeddedsw/tree/master/XilinxProcessorIPLib/drivers/usb/
...
https://github.com/Xilinx/embeddedsw/tree/master/XilinxProcessorIPLib/drivers/usb/examples
Below is the testing procedure of AXI USB standalone example which operates as a mass storage gadget
- Download and run the generated USB 2.0 example ELF
- Connect board setup to standard host(Windows/Linux)machine USB 2.0 port.
You will get pop-up window on Window machine for formatting the size 256MB. After format completes, you can copy file to usb device.
Change Log
2017.3Summary:
- None
2017.4
- None
2018.1
- None
2018.2
- None
2018.3
- None
2019.1
- None
2019.2
- None
2020.1
- None
2020.2
- None