...
Configuring the Zynq UltraScale PS/PL interfaces:
Here, I have enabled the Slave port to allow access to the OCM/DDR (HP), and the PS UART (LPD):
Also, enable the fragmentation so we can use the PS_UART:
In this demo, we shall be using no LMB/AXI BRAM for the Microblaze. So, we will need to hold the Microblaze in reset, while the PSU
is configured. We can then wakeup by toggling a GPIO pin. I also enabled the GPIO via the EMIO here to do this:
...