...
- You should have a SD card with a valid boot partition. Refer this article to set up your SD card.
ZCU102
Make sure SW6 configuration is as shown in the image:switch configuration for SD boot |
For ZCU102, you will need to copy the below files on to your SD card boot partition:
- BOOT.BIN
- image.ub
- boot.scr
ZC702/ZC706
Make sure SW16 configuration is as shown in the image:switch configuration for SD boot |
For ZC702/ZC706, you will need to copy below files on to your SD card boot partition:
- BOOT.BIN
- image.ub
- boot.scr
ZedBoard
Make sure JP 7, 8, 9, 10, and 11 configuration is as shown in the image:...
For ZedBoard, you will need to copy below files on to your SD card boot partition:
- BOOT.BIN
- image.ub
- boot.scr